AG CUBICLE DISPENSER
Quick, Easy And Economical Use Of Materials
With greater emphasis on cow comfort it is essential to make sure cubicles are well bedded and using an AG cubicle bedding dispenser is the most efficient way. The cubicle bedding dispenser has been developed especially with this in mind, enabling dairy farmers to bed cubicles regularly with speed and ease, minimising dust, and with economical use of materials.
As a result you get comfortable, clean, happy and healthy cows, consequently helping to meet the demand of Dairy Farm Assurance Schemes.
Benefits
- Labour saving
- Cow comfort – happy health cows give more milk
- Clean, dry cubicle beds resulting in lower cell counts
- Economical spreading – saving up to 50% on bedding materials
Features
- 160 cubicles can be bedded in 5-6 minutes
- Spreads most materials, including; sawdust, shavings, sand, chopped straw, paper and also lime
- Can be used on a tractor or handler, also spreading from either side
- Extremely low maintenance; no PTO’s, chains or blowers.
- Tilting Mechanism allows the bedding dispenser to be tilted flat to fill when mounted on the rear of the tractor
“A highly effective machine, the cost of which was recovered in the first winter”
Farm Manager, Harper Adams University College, UK
Farm Manager, Harper Adams University College, UK
“One of the most time-saving and efficient machines I’ve ever invested in”
John Loftus, Lancashire, UK
“This machine has transformed bedding, it has reduced time, dust levels and probably the cell count”
Balbernie Dairy Farm, Fife, Scotland
Please see below for the main features and optional extras available with the dispenser. All of the components highlighted in yellow below contribute towards the longevity and efficiency of the AG Hybrid Dispenser MKII.
Conveyor vs Spinners
Conveyors
-
Maximum output 2 tons/min (sand)
-
Suitable for all bedding types
-
Higher output than spinners
-
Higher volume to brisket board which means less frequent bedding intervals
Spinners
-
Maximum output 1 ton/min (sand)
-
Suitable for sand
-
Faster sand drying times
-
Even spread pattern
-
Fewer wearing parts
The Dispenser Hybrid MKII
Available in 4 sizes, all galvanised, powder coated and suitable for a range of different machines as shown below.
| Machine used | Light materials (sawdust etc) | Heavy materials (sand etc) | |||||||||
| 125 Hybrid | 150 Hybrid | 175 Hybrid | 200 Hybrid | AG 150 | AG 200 | 125 Hybrid | 150 Hybrid | 175 Hybrid | 200 Hybrid | ||
| Skid Steer | √ | √ | √ | √ | √ | √ | |||||
| Front End Loader | √ | √ | √ | √ | √ | ||||||
| Compact Loader | √ | √ | √ | √ | √ | √ | √ | ||||
| Telehandler | √ | √ | √ | √ | √ | ||||||
| 3 Point Tilt | √ | √ | √ | √ | √ | √ | √ | ||||
| 2 Point Tilt | √ | √ | √ | √ | √ | ||||||
The above table is a guideline only and depends upon the actual lift capacities of the machines used.
Specification
- Capacity 1.08 cubic metres
- Unladen Weight 454 kg (Conveyor unit)
- Width (A) 1460mm
- Depth (B) 1122mm
- Height (C) 1226mm
- Capacity 1.29 cubic metres
- Unladen 548 kg (Conveyor unit)
- Width(A) 1710mm
- Depth(B) 1122mm
- Height(C)1226mm
- Capacity 1.5 cubic metres
- Unladen weight 718kg (Conveyor unit)
- Width(A) 1960mm
- Depth(B) 1127mm
- Height(C) 1226mm
- Capacity 1.7 cubic metres
- Unladen Weight 789kg (Conveyor unit)
- Width(A) 2210mm
- Depth(B) 1127mm
- Height(C) 1226mm
- Capacity 0.9 cubic metres
- Unladen Weight 395 kg
- Width(A) 1515mm
- Depth(B) 950mm
- Height(C) 1010mm
- Capacity 2.0 cubic metres
- Unladen Weight 580 kg
- Width(A) 2034mm
- Depth(B) 1339mm
- Height(C) 1247mm
Attachments
We offer a range of brackets for fitting to most tractors loaders and handlers.
Click here to see our range of brackets
Ag linkages as tilting mechanisms allow buckets to be tipped for self loading.
Click here to see our linkage options
